|
|
 |
(ATP620)
AATI designed this program to train students for
an entry-level position in the competitive automotive
industry.
|
|
Module |
Description |
Clock Hours |
A12001 |
Engine Repair |
160
|
A15001 |
Eletrical & Electronic Systems |
120
|
A16001 |
Engine Performance |
56
|
A10001 |
Suspension, Steering & Alignment |
40
|
A08001 |
Brakes and ABS Systems |
88
|
A11001 |
Heating and Air Conditioning & Engine Cooling Systems |
56
|
A13001 |
Manual Drive Train & Axle |
36
|
A14001 |
Automatic Transmissions / Transaxles |
64
|
| |
TOTAL CLOCK HOURS |
620
|
|
Upon completion of the program a diploma
will be awarded.
In order to obtain
the licenses required by Miami-Dade and Broward County,
students must pass the AATI or ASE Certification
exams.
These classes MAY NOT be taken
individually. Pre-Requisite is required.
|
|
|
(AATP620)
AATI designed this
program for automotive technicians who are presently working
in the field with the necessity to update their technical
knowledge in specific areas of the Automotive Service industry,
such as Air Conditioning, Electrical and Electronic Systems,
Antilock Brake Systems, Fuel Injection, Alignment, Steering
and Suspension, Diesel Update, Electronic Measurements,
Oscilloscope, Scanner, Emission Analyzer, and Onboard Diag.
(OBD II).
|
|
Module |
Description |
Clock Hours |
AA1102 |
Heating & Air-Conditioning System |
60 |
AA1502 |
Electrical & Electronic Systems |
100 |
AA8392 |
Anti-Lock Brake System |
60 |
AA6492 |
Fuel Injection System |
80 |
AA1002 |
Suspension, Steering & Alignment |
60 |
AT3002 |
Diesel Update - Electronic Control |
60 |
AA5012 |
Electronic Measurement |
20 |
AA6992 |
Oscilloscope |
40 |
AA6982 |
Scanner |
60 |
AA6592 |
Emission Analyzer |
40 |
AA6972 |
Onboard Diagnostic II |
40 |
| |
TOTAL CLOCK HOURS |
620 |
|
Each
specialty may be taken individually. You must be employed
in the
field, have a minimum of two (2) years experience or
have taken the same module from the Automotive Technology
Program.
Upon completion of each specialty, the institute will
award a certificate, with the completion of the program
a diploma
will be awarded. In order to obtain the certifications
required by Miami-Dade and Broward County, students must
pass the AATI or ASE certification exams.
|
|
|
(ATP300)
AATI designed this program
for automotive technicians who are presently working
in the field with the desire to specialize themselves
in the field of manual and/or automatic transmission.
|
|
Module |
Description |
Clock Hours |
T11001 |
Manual Transmission & Power
Trains |
50
|
T12001 |
Automatic Transmission & Transaxles |
250
|
| |
TOTAL CLOCK HOURS |
300 |
|
Upon completion
of the program a diploma will be awarded.
In order to obtain
the licenses required by Miami-Dade and Broward County,
students must pass the AATI or ASE Certification
exams.
These classes MAY NOT be taken individually. Pre-Requisite
is required.
|
|
|
(ATP320)
AATI designed this
program for Automotive Technicians who are currently
working in the field, to help them study, review
technical knowledge, and seek additional reference
material to pass the American Advanced Technicians
Institute, Corp. and/or the Automotive Service Excellence
Certification Exams. Passing the certification exams,
proves the automotive technician has the capacity
and the ability to perform at a high-level. Thus
showing their employers and customers the skills
needed to further customer trust and improving the
image of Automotive Technicians.
|
|
 Category
I: Automotive: Automobile / Light Truck
Module |
Description |
Clock Hours |
AC1001 |
Engine Repair |
20
|
AC2001 |
Engine Performance |
20
|
AC3001 |
Brakes |
20
|
AC4001 |
Front End (Suspension & Steering) |
20
|
AC5001 |
Heating & Air Conditioning |
20
|
AC6001 |
Electrical & Electronic
Systems |
20
|
AC7001 |
Automatic Transmission / Transaxle |
20
|
AC8001 |
Manual Drive Train & Rear
Axle |
20
|
|
TOTAL CLOCK HOURS |
160 |
Category
II: Collission: Automobile / Light Truck (Non-Mechanical)
Module |
Description |
Clock Hours |
BC9001 |
Non-Structural Analysis |
20
|
BC1001 |
Painting & Refinishing |
20
|
BC1101 |
Structural Analysis |
20
|
| |
TOTAL CLOCK HOURS |
60
|
Category
III: Medium Heavy-Duty Trucks
Module |
Description |
Clock Hours |
TC1201 |
Engine Repair (Gasoline / Diesel) |
20
|
TC1301 |
Drive Trains |
20
|
TC1401 |
Brakes & Braking Systems |
20
|
TC1501 |
Suspension & Steering System |
20
|
TC1601 |
Electrical Systems |
20
|
| |
TOTAL CLOCK HOURS |
100
|
|
Each specialty
lasts 20 hours of class, including 4 hours of review.
They may be taken individually.
You must be employed in the field for at least 2 years
to be eligible for the preparation courses mentioned
above.
Upon completion of each specialty, the institute will
award a letter of completion and with the completion
of the program a diploma will be awarded.
In order to obtain
the licenses required by Miami-Dade and Broward County,
students must pass the
AATI or ASE certification
exams.
|
|
|
